Filter

OE Navigation for GM Vehicles

SKU: 250-7718D

$1,499.00

Designed for use on MyLink, IntelliLink, CUE with 8″ screen.
Features HERE voice-guided mapping from Nokia.
Driver can speak commands with steering wheel controls.
Thousands of points of interest (POI) automatically included.
Includes road and highway maps for USA, Canada, and Mexico.
GPS signal provided through included magnetic base antenna.
Installs in just minutes on most vehicles.
Plug-and-play using factory wire harness already on the vehicle.
Requires no dismantling of factory LCD components.
Annual map updates available from navigation.com.

QUESTIONS? Call 253-297-4570
8:00AM - 6:00 PM PDT

GM MyLink, IntelliLink and CUE vehicles that come with the factory installed 8″ touch screen can now have FACTORY NAVIGATION retro-fitted very easily with the new “Soft-Touch” OE Navi Upgrade Modules. Some vehicles listed have replacement radios available that will be exactly as factory.

Originally available for upper trim levels only, these navigation modules allow you to gain all of the factory functions without any intrusive installation, and operate EXACTLY like factory because they are FACTORY modules!

Soft Touch modules utilize the factory LCD Panel that is pre-installed in the vehicle, guaranteeing a completely FACTORY experience.

The factory Owner’s Manual covers all operations (and is not included with purchase).

All vehicles will require programming of the upgrade module or radio to the VIN of the vehicle. A picture of the VIN plate (located on dashboard or driver’s door opening) or option code plate (usually located inside glove box) will be required for ordering.

Vehicles with and w/o Car Play/Android Auto require different modules – please verify whether you have the “PROJECTION” icon in the radio menu before ordering. (NOTE: 2016 vehicles with option code “CPO” DO NOT have Car Play/Android Auto)

NOTE: Factory upgrade modules are not available for vehicles with factory 4″ or 7″ screens

Q: Is this the same navigation system that would have been originally supplied in my vehicle?
A: Yes, this is exactly what GM would have installed if your vehicle had come equipped with navigation.

Q: Do I use the Owner’s Manual that was originally supplied in my vehicle?
A: Yes, since this is the same system that GM would have installed, you use the same manual. We have also provided links to GM Owner’s Manuals in the following section.

Q: Will I need to install a GPS antenna on the roof?
A: No, the GPS antenna provided with the system can be installed under a dashboard panel, usually near the base of the windshield and will operate perfectly.

Q: Will the system add Apple CarPlay or Android Auto?
A: No, those systems require specific additional hardware to be compatible with both systems. This module only adds navigation.

Q: If I have the “Projection” icon on my screen already, does that mean I have Apple CarPlay/Android Auto?
A: Yes, and if you do have the “Projection” icon, a different module will need to be provided. This will add $50 to the cost of the system.

Q: I’m trading in my car soon. Can I swap this module to my new vehicle?
A: No. The module is programmed to the VIN of the vehicle it is being installed into and there is no accommodation made to reprogram.

Make	Model	Year	Option
Make	Model	Year	Option
BUICK	ENCORE	2017
BUICK	ENVISION	2016 - 2017
BUICK	REGAL	2016 - 2017
CADILLAC	ATS	2016 - 2017
CADILLAC	CT6	2017
CADILLAC	CTS	2016 - 2017
CADILLAC	SRX	2016
CADILLAC	XT5	2017
CADILLAC	XTS	2016
CHEVROLET	CAMARO	2016 - 2017
CHEVROLET	COLORADO	2016 - 2017
CHEVROLET	CORVETTE	2016 - 2017
CHEVROLET	IMPALA	2016 - 2017	LATE 2016
CHEVROLET	MALIBU	2016 - 2017
CHEVROLET	SILVERADO 1500	2016 - 2017
CHEVROLET	SILVERADO 2500	2016 - 2017
CHEVROLET	SILVERADO 3500	2016 - 2017
CHEVROLET	SUBURBAN	2016 - 2017
CHEVROLET	TAHOE	2016 - 2017
CHEVROLET	VOLT	2016 - 2017
GMC	CANYON	2016 - 2017
GMC	SIERRA 1500	2016 - 2017
GMC	SIERRA 2500	2016 - 2017
GMC	YUKON	2016 - 2017

Product Installation (2015 Chevrolet Silverado for reference)

Step 1: Raise the upper and lower glovebox doors to gain access to the glovebox mounting screws
Step 2: Remove the two glovebox mounting screws located across the upper glovebox trim panel
Step 3: Remove the two glovebox mounting screws located across the lower glovebox trim panel
Step 4: Gently pry the lower glovebox away from the dashboard gaining access to the area behind
Step 5: Disconnect the wiring attached to the factory infotainment control module
Step 6: Gently remove the factory infotainment module from its dashboard mount by pulling forward
Step 7: Slide the Rostra SoftTouch OE infotainment control module into the factory dashboard mount
Step 8: Gently pry the dashboard side panel away gaining access to route the GPS antenna harness
Step 9: Lift the factory speaker grill to gain access to the factory GPS antenna mounting location
Step 10: Place the GPS antenna into the factory location, connect it to the navigation module and close the grill